Copyright 2013 GAT TECHNOLOGIES
15-21 Aitken Street
Williamstown Vic 3016
Australia and New Zealand
Tel: 61 3 9397 0001
Fax: 61 3 9397 0037
Exclusive Australian Representatives
Korogard Wall and Door Protection Systems
Korographics Printable Wall Media
Traffic Patterns Decorative Wall Protection
ActegaWit Inks, Coatings and Adhesives
Norcote Printing Inks
MacDermid Autotype Industrial Film
Avery Dennison Industrial Adhesives
Extreva HP Indigo Film
Clearplex Windshield Protection Film
Scicron Antistatic Plastic
GATgard High Performance Film
GATjet Wide Format Digital Film
Rowlux Illusion Film
Rowtec Polycarbonate Film
SDI Contact Cleaning Equipment
SigmaGraf Digital Film
SolaTuf Modified Acrylic Film
© GAT Technolgies 2013 Site Design by web-o-licious
Architectural & Interiors
Industrial Films Inks & Adhesives
Digital Films, Backers & Overlaminates
Safety Security & Specialty Plastics
Architectural & Interiors
A new film technology that once laminated to Glass, Polycarbonate sheets will extend the life of your glazing.
Mental Health Facilities
How to Replace/Refurbish
When the NULIFE Film surface is damaged, scratched or vandalized the material may be restored as follows
Remove the damaged NULIFE film from the Substrate surface by cutting the film around the perimeter of the window frame with a sharp razor blade.
After peeling off the damaged film, a residue free and clean surface will be exposed to reapply a new layer of NULIFE film.
Have a new layer of NULIFE Film laminated onsite by anpproved installer.
For security, applications have the entire glazed unit removed and returned to an authorized GAT laminator. This Glazing method provides a cost effective alternative to total glazing replacement.
Cleaning and Maintenance
NULIFE film products should be washed with a mild solution of soap or detergent in warm water using a soft cloth. Avoid the use of abrasive cleaners.
Film for use on glass and substrates
Increased safety by helping hold shattered glass together
Clear, non-tinted appearance
Improved security by creating a deterrent to forced entry
Easily removed for Anti-Graffitti applications
Shading Coefficient 0.98
Total Solar UV
Energy Rejected 15%
Film Thickness .006"
Tensile Strength 25,000 PSI
Break Strength 150 Pounds per Inch
Peel Strength 2 to 3 Pounds per Inch
A Protective Hardcoated Film that is compatible for your Polycarbonate and Acrylic Windows that can be removed when damaged without leaving any adhesive residue, offering NULIFE to your glazing.
NULIFE Graffiti film is a hardcoated film offering excellent resistance to abrasion, chemicals, solvents and graffiti. Similar to traditional hardcoat sheet but with the added benefit of removability if damaged without leaving any adhesive residue. This provides ultimate sacrificial surface protection for polycarbonate or acrylic substrates.